<< ZPĚT

new
BALL HEAD ABUTMENTS FOR OVERDENTURE

The ball head abutments for overdenture represent an evolution of the O-ring overdenture abutment product line. The abutments feature a perfectly ballshaped head with a titanium nitride coating to increase its wear resistance. The angled abutments are characterized by the LEONE 360° connection, protected by an international patent, having an apical hexagon separated from the rest of the abutment. The free positioning to 360° of the abutment on the dental cast makes it easy to achieve parallelism, whereas the permanent connection of the hexagon in the selected position allows an accurate placement of the abutment in the mouth. The ball head abutments for overdenture are available with the Standard prosthetic platform only for 3,3 mm and 3,75 mm implants (green connection size) and for 4,1 mm, 4,5 mm and LEONE 6.5 implants (yellow connection size), in straight and 15° angled version, in 3 different gingival heights, 1,5 – 3 – 5 mm.

ball head abutmenrsIn conjunction with these abutments, elastomer retentive inserts with ball anchorage in different types of rigidity have been developed to provide a method of stabilization for overdentures that is alternative to the traditional O-ring system.
The inserts are available in three different types of rigidity, identifiable by the following colour code: white (soft insert), orange (medium insert), violet (rigid insert).

The inserts are contained within specific metal housings: the housings are made of pink anodized titanium for better aesthetics within the removable denture; from a dimensional point of view they take up very little space, less than the micro housings with O-ring.
The retentive inserts are compatible with the abutments for O-ring overdenture which are available until stocks are exhausted; therefore they can also be used in conjunction with them for already restored cases.

To complete components related to ball head abutments, spacer rings have been developed, i.e. rings made of plastic material to place on the abutment when incorporating the housings into the removable denture, in order to obtain a supporting surface for the housings. In this way a correct degree of penetration of the housing on the ball head is ensured, holding it in place, along the head axis or with a preset angulation, preventing, in any case, unwanted inclinations.

When replacing the insert, remove the worn-out insert and press the new one into the housing by means of the specific instrument Cat. 156-1004-00.

ball head abutments

BALL HEAD ABUTMENTS FOR OVERDENTURE

Made of medical grade 5 titanium, they are seated into the implants through the LEONE 360° connection.
Pack content:

  • 1 abutment
  • 1 hexagon (for the angled abutments only)
  • 1 housing with O-Ring
  • 1 micro housing with O-Ring
  • 1 micro housing with orange medium insert
  • 1 low spacer ring
  • 1 high spacer ring
  • 1 high angled spacer ring

housing abutmentyHOUSING WITH O-RING

Made of medical grade 5 titanium. Outer diameter: 5,4 mm, height: 3,1 mm.
Pack content:

  • 1 housind with O-ring
  • 1 low spacer ring for abutments

MICRO HOUSING WITH O-RING

Made of medical grafe 5 titanium. Outer diameter: 4,2 mm, height: 2,8 mm.
Pack content:

  • 1 micro housing O-ring
  • 1 low spacer ring for abutments (grey)
  • 1 spacer ring for monoimplants (white)

accessories for ball head abutments for overdenture


accessories ball head

OVERDENOVERDENTURE MICRO HOUSING WITH WHITE SOFT INSERTTURE MICRO HOUSING WITH WHITE SOFT INSERT 

Made of medical grade 5 titanium, outer diameter 4 mm, height 2 mm.
With pre-mounted white soft insert.
Pack content: 2 overdenture micro housings, 2 high spacer rings, 2 high angled spacer rings

123-0001-02
REFILL - WHITE SOFT MICRO INSERTS
Pack of 6

OVERDOVERDENTURE MICRO HOUSING WITH ORANGE MEDIUM INSERTENTURE MICRO HOUSING WITH ORANGE MEDIUM INSERT 

Made of medical grade 5 titanium, outer diameter 4 mm, height 2 mm.
With pre-mounted orange medium insert.
Pack content: 2 overdenture micro housings, 2 high spacer rings, 2 high angled spacer rings

123-0001-03
REFILL - ORANGE MEDIUM MICRO INSERT
Pack of 6

OVERDENTURE MICRO OVERDENTURE MICRO HOUSING WITH VIOLET RIGID INSERTHOUSING WITH VIOLET RIGID INSERT 

Made of medical grade 5 titanium, outer diameter 4 mm, height 2 mm.
With pre-mounted violet rigid insert.
Pack content: 2 overdenture micro housings, 2 high spacer rings, 2 high angled spacer rings

123-0001-04
REFILL - VIOLET RIGIF MICRO INSERTS
Pack of 6

OVERDENTURE INSERT SOVERDENTURE INSERT SEATING TOOLEATING TOOL

Made of stainless steel.
It is used to place the insert for overdenture inside its housing.